home *** CD-ROM | disk | FTP | other *** search
- Path: ppp-124-pm1.wizard.com!user
- From: tpir72@wizard.com (Terry Wilkie)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Pinnacle RCD1000 & Fastlane Z3
- Date: 25 Feb 1996 02:46:54 GMT
- Organization: @wizard.com
- Message-ID: <tpir72-2402961845030001@ppp-124-pm1.wizard.com>
- References: <4ftf0j$o62@catapult.gatech.edu> <1626.6620T1229T769@ping.be> <900.6622T832T23@jytol.fi> <1040.6622T983T283@mcs.com>
- NNTP-Posting-Host: ppp-124-pm1.wizard.com
-
- In article <1040.6622T983T283@mcs.com>, kanep@mcs.com (Kane Peterson) wrote:
-
-
- > >What ?!? I have write a few CD's on A3000, 1GB Seagate Medalist, and 1GB
- > >Seagake Hawk, 3.x OS and 10MB memory. And MasterISO works fine.
- >
- > From what I have heard. MasterISO will work with more than what is listed in
- > the manual. The manual only lists _tested_ configurations, but A3000 and
- > A2000 systems should be able to use it as well. The important part is that
- > you need a good SCSI controller (no 2090A), and a fast hard drive.
-
-
- WARNING: I just bought a Pinicalle RCD-1000 to record audio CD's on my
- 4000 using a 4091 and Master ISO. After Digitizing 74 mins. of AIFF from a
- Sunrize Studio 16 card then trying to convert to CDDA files the MASTER ISO
- software would not convert because the file sizes are different sizes (
- left & right channel ). I'm now about $ 1800. into this and still can't
- record an Audio CD.
- Anyone out there know an easyier way ?
-
- Please reply through AOL via TPIR72.
-
- Thanks,
-
- Terry Wilkie
-